explanation of the switch

temperatur controlled deuterium reaktor with deuterium factory.

how to start the raktor:
1.switch on the deuterium pump with "DEUTRON"
2.switch on deuterium compression with "1❉"
3.choose a reactor heat level (1-4)
4.switch on the reaktor with "REAKTOR"

how to start the deuterium producer (mixer)
1. switch on the waterpump with "WATERP."
2. switch on the heater "HEAT" and wait until "HOT" lights
3. switch on the deuterium freezer "D20❉"
4. switch on mixer "MIXER-ON"

explanation of the switch:
"EMPTY" is to clear reactor coolant circuit
"FILL" is to fill reactor coolant circuit with glow
"RCOOL" is to cool down the right side from the reactor building
"LCOOL" is to cool down the left side from the reactor building
the kontroll lights on the right top side from the use panel is the temperatur status from the building
and on the top left side is the temperatur status from the reaktor.
with the keys 1-4 you can choose the heat level from reactor
"COOLREA" cools down the reaktor
"R2HEAT" is a deuterium saving mode from reaktor
"REAKTOR" is to switch on or off the reaktor
"DEUTRON" switch on or off the deuterium pump for the reaktor
"D20❉" switch on or off the deuterium cooler from the deuterium factory
"MIXER-ON" switch on or off deuterium mixer
"MIXER-CLR" is to empty the deuterium mixer

Controlpanel

Reaktor heat level

 Here you can choos the heat level and look at the aktuel staus heatlevel from the reaktor

Status Display

 Working staus from reaktor

 Working status from Deuterium Mixer

Building heat level

Mixer

Turns on or off the deuterium cooler

switch on off the waterpump for the mixer

switch on/off the vaporizer, here the vaporizer seperate the deuterium from the water, when the vaporizer is hot, the "HOT" writings lights.

sometimes the mixer needs to clean or clear, at this switches you can empty the mixer.

turns on/off the mixer, mixer begins to produce deuterium

Procedure to turn on the mixer: 

1. switch on the waterpump with "WATERP."
2. switch on the heater "HEAT" and wait until "HOT" lights
3. switch on the deuterium freezer "D20❉"
4. switch on mixer "MIXER-ON"

Reaktor

Cool Down the reaktor

Switch on/off the reaktor

Deuterium Pump, this you need to turn on befor you switch on the reaktor

compressed and cool down the deuterium.
I recommend,  swith only both cooler on if the reaktor is running at level 4

Saving mode, if you turn on this, you dont need so much deuterium.

clear the cooling circuit from the reaktor

fill cooling circuit from keator
only use this switches if the reaktor dont works.

work status display from reaktor

Procedure to turn on Reaktor: 

1.switch on the deuterium pump with "DEUTRON"
2.switch on deuterium compression with "1❉"
3.choose a reactor heat level (1-4)
4.switch on the reaktor with "REAKTOR"

Building-cooling

if the building goes hot, the control unit from the building cooler turns off the reaktor and switch on the cooler from the bulding

heat level from building

turns on the cooler on the right side from building

turns on the cooler on the left side from building