explanation of the switch

temperatur controlled deuterium reaktor with deuterium factory.

how to start the raktor:
1.switch on the deuterium pump with "DEUTRON"
2.switch on deuterium compression with "1❉"
3.choose a reactor heat level (1-4)
4.switch on the reaktor with "REAKTOR"

how to start the deuterium producer (mixer)
1. switch on the waterpump with "WATERP."
2. switch on the heater "HEAT" and wait until "HOT" lights
3. switch on the deuterium freezer "D20❉"
4. switch on mixer "MIXER-ON"

explanation of the switch:
"EMPTY" is to clear reactor coolant circuit
"FILL" is to fill reactor coolant circuit with glow
"RCOOL" is to cool down the right side from the reactor building
"LCOOL" is to cool down the left side from the reactor building
the kontroll lights on the right top side from the use panel is the temperatur status from the building
and on the top left side is the temperatur status from the reaktor.
with the keys 1-4 you can choose the heat level from reactor
"COOLREA" cools down the reaktor
"R2HEAT" is a deuterium saving mode from reaktor
"REAKTOR" is to switch on or off the reaktor
"DEUTRON" switch on or off the deuterium pump for the reaktor
"D20❉" switch on or off the deuterium cooler from the deuterium factory
"MIXER-ON" switch on or off deuterium mixer
"MIXER-CLR" is to empty the deuterium mixer